News

The magnetic pump will arrange the magnet (n is an even number) on the inner and outer magnetic rotor of the magnetic drive according to the rule, ...

Pneumatic diaphragm pump is a new type of conveying machinery and is currently the most innovative pump type in China. Using compressed air as the ...

Electric diaphragm pump is a new type of pump. In recent years, due to breakthrough progress in diaphragm material, it has been applied in industri...

The suction bottom valve is actually a check valve that ensures that the water flow can only enter the suction pipe from the pool and cannot backflow.

Increase the maximum circumferential velocity at the impeller outlet and the width of the impeller blade outlet. The maximum circumferential veloci...

From the perspective of flow rate and pressure range, screw pump design is superior to any other type of pump. The flow rate processed by the screw...

The oil leakage of the submersible pump is mainly caused by severe wear and tear of the sealing box, resulting in oil leakage in the oil chamber of...

Common faults in the use of pneumatic diaphragm pumps include: pump failure to start or slow action, pump running but with low flow rate, large amo...

The bottom valve installed at the bottom of the water tank in the inlet pipeline of the self suction pump can increase the suction head by about 1 ...

Magnetic drive pump, abbreviated as magnetic pump. Like shielded pumps, there is only a static seal in the structure without a dynamic seal. So the...

Bearing damage: The material used for the bearings of the magnetic pump is high-density carbon. If the pump runs out of water or there are impuriti...

Single screw pumps are very suitable for use in industries with higher hygiene levels, such as the medical industry, food and beverage industry, etc.