Electric diaphragm pump is a new type of pump. In recent years, due to breakthrough progress in diaphragm material, it has been applied in industries such as petrochemicals, ceramics, metallurgy, etc. Its characteristic is that it does not require water injection and has strong self suction ability. Directly separate the conveyed medium from the transmission mechanical components, so the medium will never leak outward. And the pump itself has no shaft liquid seal, greatly extending its service life. Application areas: Diaphragm pumps have taken an absolute dominant position in the paint and ceramic industries; It is expanding its market share in environmental protection, wastewater treatment, construction, sewage discharge, and fine chemicals, and has an irreplaceable position in other pumps.
1. No need for irrigation, with a self suction capacity of over 7 meters.
2. Through good performance, particles and mud with a diameter of less than 10 millimeters can pass through effortlessly.
3. Due to the separation of the diaphragm from the conveying medium and transmission mechanical components, the medium will never leak outward. And the pump itself has no shaft seal, greatly extending its service life. According to different media, the diaphragm can be divided into chloroprene rubber, fluororubber, nitrile rubber, etc., which can fully meet the requirements of different users.
4. Small size and light weight: Due to the use of a planetary cycloidal transmission structure, the pump type has a smaller size. Compared with similar pumps, its volume and weight are reduced by about half.
5. The medium flowing through the pump body can be divided into cast iron, stainless steel, rubber lining according to user requirements, and the motor can be divided into ordinary, explosion-proof, and speed regulating types. Currently, this pump is being used in the following situations.