The submersible pump mainly consists of a control cabinet, submersible cables, lifting pipes, submersible electric pumps, and submersible motors. Its use in mining rescue, construction drainage, agricultural water drainage and irrigation, industrial water circulation, water supply for urban and rural residents, and even disaster relief is very important. With the rapid development of technology, the development of submersible pumps must be highly valued. Only through long-term and continuous exploration can the advantages of submersible pumps be further maintained. The way to maintain their competitiveness can be through studying the functional characteristics and functions of submersible pumps. Next, we will analyze the functional characteristics and functions of submersible pumps:
The functional characteristics of submersible pumps:
1. The unique cable sealing design eliminates the risk of cable leakage.
2. An oil-water probe is installed at the upper end of the oil chamber between the pump and motor to monitor the mechanical seal on the pump side. In case of water leakage, the control system will alarm for protection.
3. The auxiliary impeller is used to balance the external pressure of the mechanical seal, prevent water from entering the oil chamber, and thus extend the service life of the electric pump.
4. A replaceable wear-resistant sleeve is installed between the impeller and the lower end of the volute to keep the pump running at optimal efficiency.
5. The impeller design is unique, and the large flow channel can pass through long fibers and dirt, with strong anti clogging, anti winding, and overcurrent capabilities.
The function of a submersible pump:
The submersible pump is mainly used for deep well water extraction, and its entire unit works by diving into the water during operation. Extracting groundwater to the surface is used for domestic water, mine rescue, industrial cooling, farmland irrigation, seawater lifting, ship loading, and can also be used for fountain landscapes.
The hot water submersible pump is used for hot spring bathing, and can also be used to extract groundwater from deep wells. It can also be used for water extraction projects such as rivers, reservoirs, and channels. Mainly used for irrigation in farmland and water for human and livestock in high-altitude areas, it can also be used for central air conditioning cooling, heat pump units, cold pump units, cities, factories, railways, mines, and construction site drainage. The general flow rate can reach 10m3-650m3 per hour, and the head can reach 1500 meters.
Through the analysis of the functional characteristics and functions of submersible pumps, we can have a deeper understanding that the good or bad of a product not only requires strong functional characteristics, but also its unique advantages in a certain field. After years of development, dedicated pumps have their own advantages in the pump industry. There is still a lot of work to be done to maintain and improve this advantage.