summarize
The pump body is made of PVDF fluoroplastic material, also known as perfluorinated diaphragm pump. Is a particularly strong corrosion resistance of the pump model, its application range is very wide, can be applied to any strong acid, strong alkali medium and all kinds of organic solvents in addition to molten alkali salt, especially high concentration of sulfuric acid, nitric acid and other liquids can be transported. Using compressed air as the driving source, there are no electronic components in the pump, combined with the special structural principle of the diaphragm pump, to solve the shortcomings of the vane pump leakage and do not allow idling. It is a pump that integrates the advantages of impurity pump, self-priming pump, mud pump, shield pump, submersible pump and other conveying machinery. It can transport all kinds of highly corrosive, with particles, high viscosity, volatile, flammable, explosive, highly toxic liquid, as well as ceramic glaze, fruit pulp, glue and other media with poor viscosity and fluidity. Especially suitable for tanker bottom oil recovery, temporary tank pouring and other liquids can be pumped out.
peculiarity
1, The flow part of the pneumatic PTFE diaphragm pump is made of high quality polyvinylidene fluoride material, PVDF has good chemical stability, excellent chemical corrosion resistance and good heat stability. Suitable for chemical industry, biopharmaceutical industry, sewage pharmaceutical production and other industries.
2, Compared with the metal material pneumatic diaphragm pump, the weight is light, as long as there is an air source, the gas pipe inserted into the fluorine plastic diaphragm pump intake valve, you can work, so the mobile performance is strong, very suitable for some need to move often pumping liquid conditions.
3, Fluorine plastic diaphragm pump easy to use, reliable work, open and stop simply open and close the gas valve, even if due to unexpected circumstances for a long time without medium operation or sudden stop the pump will not be damaged, once overload, the pump will automatically stop, with self-protection performance, when the load returns to normal, and can automatically start operation.
4, Fluorine plastic pneumatic diaphragm pump is through the reciprocating motion of the diaphragm to achieve the pumping of the medium, there is no rotating parts such as blades in the pump, so the flow is spacious, through good performance, allowing the passage of large particles up to 10 mm in diameter. When pumping mud and impurities, it has little wear on the pump and can transport more viscous liquid (viscosity below 10,000 centipoors).
5, The use of compressed air drive, explosion-proof performance is strong, do not worry about the danger because of the wire, the engine, in the flammable, explosive environment without taking any protective measures, and can be adjusted by adjusting the valve opening to achieve stepless adjustment of the diaphragm pump outlet flow. You don't have to worry about the noise.
Hot Tags: pneumatic all tetrafluorodiaphragm pump, China pneumatic all tetrafluorodiaphragm pump manufacturers, suppliers, factory, Mine Underground Sand Pump, Stainless Steel Pneumatic Diaphragm Pump, Explosion proof Submersible Sewage Pump, Submersible Sewage Pump, Acid And Alkali Resistant Screw Pump, Positive Displacement Pump
